Magnum PT-100 MPPT Charge Controller

$1,179.00

Magnum PT-100 MPPT Charge Controller

Available on backorder

SKU C-ME-PT100 Categories , ,

Description

Magnum PT-100 MPPT Charge Controller

The PT-100 MPPT Controller is Magnum Energy’s first offering to the solar charge controller market. Added to their proven inverter and power panel product lines; Magnum now offers a complete solution to the core of off-grid solar electric system design.

The PT-100 is an MPPT controller rated for an impressive 100 amp output to the battery bank. This means flexibility of panel selection, array configuration, and transmission distance, as well as the ability to accommodate some of the largest array sizes with the use of a single controller.

The input voltage rating of up to 187 volts allows the panel configuration to be designed using fewer, high voltage strings of panels; offering savings in cabling, circuit breakers, combiner box selection, and transmission wire sizing over modest distance of 50 feet and up. Small incremental savings like this can quickly add up to hundreds of dollars or more and are a practical consideration of any medium or larger system design. The 100 amp output rating means the PT-100 has a impressive maximum array size of 6,600 watts.

Features include: Front panel display for array and battery bank status, charge state and fault indicators, and operational Select and Reset buttons; traditional 3-stage charging with manual equalization; on-board configuration DIP switch for “stand-alone” applications; integrated PV Ground Fault and Arc Fault detection/interruption; over temperature protection and de-rating in hot temperatures (room temperatures of 104 F and greater); output over current protection; 255 days of PV harvest and battery amp-hour data logging; programmable dry contact auxiliary relay; easy set-up and integration with Magnum inverters and Advanced Remote Control (ME-ARC rev 4.0 or greater) products; supports on-site software upgrades. The PT-100 is NOT protected against reverse polarity wiring on the PV or battery side. A voltmeter must be used to ensure proper wiring polarity during installation.

Magnum’s reputation for simplicity, quality, and customer satisfaction; along with competitive pricing, make the PT-100 an easy consideration for any larger off-grid system design.

Specifications:

  • Max PV input voltage: 200 VDC + battery voltage, or 240 VDC, whichever is lower
  • Upper MPPT Voltage Range: 187 VDC max(computed using panel Voc and coldest temperature)
  • Lower MPPT Voltage Range: 24 VDC, 41 VDC, and 73 VDC for 12, 24 and 48 volt systems, respectively
  • DC battery voltages: 12, 24, or 48 VDC
  • Maximum output power: 6,600 watts, for 48 volt systems
  • Internal cooling: dual ball-bearing fans
  • Self consumption (at night time): less than 4 watts
  • Dimensions: 8.5” W x 15.5” H x 4” D, weighs 12.5 lbs.

Temperature sensor included
Mounting bracket included
Listed to UL 1741, CSA and CE certified
5 Year Warranty

Backwoods Note: while reviewing the PT-100 owner’s manual I was once again impressed by the quality and detail that Magnum puts into their wiring diagrams: simple and thorough.

Additional information

Weight 15 lbs
model

PT-100 MPPT

File Attachments

Wishlist

No products were added to the wishlist.