{"title":"Booster Pumps","description":"","products":[{"product_id":"slowpump-1303-12v","title":"Dankoff SlowPump 1303 - 12V","description":"\u003cp align=\"left\"\u003e\u003cspan style=\"color: #ff6600;\"\u003eThis product ships directly from the Manufacturer. A short lead time may apply.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp align=\"left\"\u003eThe 1303 booster pump can draw water from shallow wells, springs, cisterns, tanks, ponds, rivers and streams, and push it as high as 240 vertical feet and through miles (kilometers) of pipeline. Slow pumping minimizes the size and cost of the solar array, wire and piping.  SlowPumps are less expensive than submersible DC pumps, and made in a much wider range of sizes. Wearing parts typically last 5 to 10 years. Overall life expectancy is 15 to 20 years.\u003c\/p\u003e\n\u003cp align=\"left\"\u003e\u003cstrong\u003eSuction Capacity\u003c\/strong\u003e 20 vertical feet (6 m) at sea level – subtract 1 ft.. for every 1,000 ft. altitude (1 m for every 1,000 m). Pump should be placed as low as possible and gravity fed water is best.  Filters, angled joints, and small diameter pipe will all impact usable suction capacity.\u003c\/p\u003e\n\u003cp align=\"left\"\u003e\u003cstrong\u003ePerformance Range\u003c\/strong\u003e 20 feet of lift delivers 2.5 gpm using 65 PV watts.  Maximim of 240 feet of lift delivers 1.96 gpm using 235 PV watts.\u003c\/p\u003e\n\u003cp align=\"left\"\u003e\u003cstrong\u003eFiltration Requirement\u003c\/strong\u003e This pump cannot tolerate dirt. Water must be filtered clear. If water is very dirty, improve the source.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePV-Direct (non-battery) Requirements\u003c\/strong\u003e The rated power of the PV array must exceed pump watts by 20% or more. See spec sheet for more info. A DSP200 Controller is required to start and run in low light. Ask about availability. 1\/2” female fittings.  Dimensions: 5.7\" x 17.375”, weight 12 lbs.\u003c\/p\u003e\n\u003cp align=\"left\"\u003eWarranty 1 year\u003c\/p\u003e","brand":"Dankoff","offers":[{"title":"Default Title","offer_id":42411732107327,"sku":"P-1303-12V","price":1099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/4611\/5647\/files\/P-2507.png?v=1767027027"},{"product_id":"slowpump-1303-24v","title":"Dankoff SlowPump 1303 – 24V","description":"\u003cp align=\"left\"\u003e\u003cspan style=\"color: #ff6600;\"\u003eThis product ships directly from the Manufacturer. A short lead time may apply.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp align=\"left\"\u003eThe 1303 booster pump can draw water from shallow wells, springs, cisterns, tanks, ponds, rivers and streams, and push it as high as 240 vertical feet and through miles (kilometers) of pipeline. Slow pumping minimizes the size and cost of the solar array, wire and piping. SlowPumps are less expensive than submersible DC pumps, and made in a much wider range of sizes. Wearing parts typically last 5 to 10 years. Overall life expectancy is 15 to 20 years.\u003c\/p\u003e\n\u003cp align=\"left\"\u003e\u003cstrong\u003eSuction Capacity\u003c\/strong\u003e 20 vertical feet (6 m) at sea level – subtract 1 ft.. for every 1,000 ft. altitude (1 m for every 1,000 m). Pump should be placed as low as possible and gravity fed water is best.  Filters, angled joints, and small diameter pipe will all impact usable suction capacity.\u003c\/p\u003e\n\u003cp align=\"left\"\u003e\u003cstrong\u003ePerformance Range\u003c\/strong\u003e 20 feet of lift delivers 2.5 gpm using 65 PV watts.  Maximim of 240 feet of lift delivers 1.96 gpm using 235 PV watts.\u003c\/p\u003e\n\u003cp align=\"left\"\u003e\u003cstrong\u003eFiltration Requirement\u003c\/strong\u003e This pump cannot tolerate dirt. Water must be filtered clear. If water is very dirty, improve the source.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePV-Direct (non-battery) Requirements\u003c\/strong\u003e The rated power of the PV array must exceed pump watts by 20% or more. See spec sheet for more info. A DSP200 Controller is required to start and run in low light. Ask about availability. 1\/2” female fittings.  Dimensions: 5.7\" x 17.375”, weight 12 lbs.\u003c\/p\u003e\n\u003cp align=\"left\"\u003eWarranty 1 year\u003c\/p\u003e","brand":"Dankoff","offers":[{"title":"Default Title","offer_id":42411732140095,"sku":"P-1303-24V","price":1099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/4611\/5647\/files\/P-2507.png?v=1767027027"},{"product_id":"slowpump-1308-12v","title":"Dankoff SlowPump 1308 - 12V","description":"\u003cp align=\"left\"\u003e\u003cspan style=\"color: #ff6600;\"\u003eThis product ships directly from the Manufacturer. A short lead time may apply.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp align=\"left\"\u003eThe 1308 booster pump can draw water from shallow wells, springs, cisterns, tanks, ponds, rivers and streams, and push it as high as 400 vertical feet and through miles (kilometers) of pipeline. Slow pumping minimizes the size and cost of the solar array, wire and piping. SlowPumps are less expensive than submersible DC pumps, and made in a much wider range of sizes. Wearing parts typically last 5 to 10 years. Overall life expectancy is 15 to 20 years.\u003c\/p\u003e\n\u003cp align=\"left\"\u003e\u003cstrong\u003eSuction Capacity\u003c\/strong\u003e 20 vertical feet (6 m) at sea level – subtract 1 ft.. for every 1,000 ft. altitude (1 m for every 1,000 m). Pump should be placed as low as possible and gravity fed water is best.  Filters, angled joints, and small diameter pipe will all impact usable suction capacity.\u003c\/p\u003e\n\u003cp align=\"left\"\u003e\u003cstrong\u003ePerformance Range\u003c\/strong\u003e 20 feet of lift delivers 1.25 gpm using 40 PV watts.  Maximum of 400 feet of lift delivers 1.0 gpm using 250 PV watts.\u003c\/p\u003e\n\u003cp align=\"left\"\u003e\u003cstrong\u003eFiltration Requirement\u003c\/strong\u003e This pump cannot tolerate dirt. Water must be filtered clear. If water is very dirty, improve the source.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePV-Direct (non-battery) Requirements\u003c\/strong\u003e The rated power of the PV array must exceed pump watts by 20% or more. See spec sheet for more info. A DSP200 Controller is required to start and run in low light. Ask about availability. 1\/2” female fittings.  Dimensions: 5.7\" x 17.375”, weight 12 lbs.\u003c\/p\u003e\n\u003cp align=\"left\"\u003eWarranty 1 year\u003c\/p\u003e","brand":"Dankoff","offers":[{"title":"Default Title","offer_id":42411732172863,"sku":"P-1308-12V","price":1099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/4611\/5647\/files\/P-2507.png?v=1767027027"},{"product_id":"slowpump-1308-24v","title":"Dankoff SlowPump 1308 – 24V","description":"\u003cp align=\"left\"\u003e\u003cspan style=\"color: #ff6600;\"\u003eThis product ships directly from the Manufacturer. A short lead time may apply.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp align=\"left\"\u003eThe 1308 booster pump can draw water from shallow wells, springs, cisterns, tanks, ponds, rivers and streams, and push it as high as 400 vertical feet and through miles (kilometers) of pipeline. Slow pumping minimizes the size and cost of the solar array, wire and piping. SlowPumps are less expensive than submersible DC pumps, and made in a much wider range of sizes. Wearing parts typically last 5 to 10 years. Overall life expectancy is 15 to 20 years.\u003c\/p\u003e\n\u003cp align=\"left\"\u003e\u003cstrong\u003eSuction Capacity\u003c\/strong\u003e 20 vertical feet (6 m) at sea level – subtract 1 ft.. for every 1,000 ft. altitude (1 m for every 1,000 m). Pump should be placed as low as possible and gravity fed water is best.  Filters, angled joints, and small diameter pipe will all impact usable suction capacity.\u003c\/p\u003e\n\u003cp align=\"left\"\u003e\u003cstrong\u003ePerformance Range\u003c\/strong\u003e 20 feet of lift delivers 1.25 gpm using 40 PV watts.  Maximum of 400 feet of lift delivers 1.0 gpm using 250 PV watts.\u003c\/p\u003e\n\u003cp align=\"left\"\u003e\u003cstrong\u003eFiltration Requirement\u003c\/strong\u003e This pump cannot tolerate dirt. Water must be filtered clear. If water is very dirty, improve the source.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePV-Direct (non-battery) Requirements\u003c\/strong\u003e The rated power of the PV array must exceed pump watts by 20% or more. See spec sheet for more info. A DSP200 Controller is required to start and run in low light. Ask about availability. 1\/2” female fittings.  Dimensions: 5.7\" x 17.375”, weight 12 lbs.\u003c\/p\u003e\n\u003cp align=\"left\"\u003eWarranty 1 year\u003c\/p\u003e","brand":"Dankoff","offers":[{"title":"Default Title","offer_id":42411732205631,"sku":"P-1308-24V","price":1099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/4611\/5647\/files\/P-2507.png?v=1767027027"},{"product_id":"slowpump-1322-12v","title":"Dankoff SlowPump 1322 - 12V","description":"\u003cp align=\"left\"\u003e\u003cspan style=\"color: #ff6600;\"\u003eThis product ships directly from the Manufacturer. A short lead time may apply.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp align=\"left\"\u003eThe 1322 booster pump can draw water from shallow wells, springs, cisterns, tanks, ponds, rivers and streams, and push it as high as 440 vertical feet and through miles (kilometers) of pipeline. Slow pumping minimizes the size and cost of the solar array, wire and piping. SlowPumps are less expensive than submersible DC pumps, and made in a much wider range of sizes. Wearing parts typically last 5 to 10 years. Overall life expectancy is 15 to 20 years.\u003c\/p\u003e\n\u003cp align=\"left\"\u003e\u003cstrong\u003eSuction Capacity\u003c\/strong\u003e 20 vertical feet (6 m) at sea level – subtract 1 ft.. for every 1,000 ft. altitude (1 m for every 1,000 m). Pump should be placed as low as possible and gravity fed water is best.  Filters, angled joints, and small diameter pipe will all impact usable suction capacity.\u003c\/p\u003e\n\u003cp align=\"left\"\u003e\u003cstrong\u003ePerformance Range\u003c\/strong\u003e 20 feet of lift delivers 0.51 gpm using 40 PV watts.  Maximimum of 560 feet of lift delivers 0.2 gpm using 340 PV watts.\u003c\/p\u003e\n\u003cp align=\"left\"\u003e\u003cstrong\u003eFiltration Requirement\u003c\/strong\u003e This pump cannot tolerate dirt. Water must be filtered clear. If water is very dirty, improve the source.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePV-Direct (non-battery) Requirements\u003c\/strong\u003e The rated power of the PV array must exceed pump watts by 20% or more. See spec sheet for more info. A DSP200 Controller is required to start and run in low light. Ask about availability. 1\/2” female fittings.  Dimensions: 5.7\" x 17.375”, weight 12 lbs.\u003c\/p\u003e\n\u003cp align=\"left\"\u003eWarranty 1 year\u003c\/p\u003e","brand":"Dankoff","offers":[{"title":"Default Title","offer_id":42411732271167,"sku":"P-1322-12V","price":1099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/4611\/5647\/files\/P-2507.png?v=1767027027"},{"product_id":"slowpump-1322-24v","title":"Dankoff SlowPump 1322 – 24V","description":"\u003cp align=\"left\"\u003e\u003cspan style=\"color: #ff6600;\"\u003eThis product ships directly from the Manufacturer. A short lead time may apply.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp align=\"left\"\u003eThe 1322 booster pump can draw water from shallow wells, springs, cisterns, tanks, ponds, rivers and streams, and push it as high as 560 vertical feet and through miles (kilometers) of pipeline. Slow pumping minimizes the size and cost of the solar array, wire and piping. SlowPumps are less expensive than submersible DC pumps, and made in a much wider range of sizes. Wearing parts typically last 5 to 10 years. Overall life expectancy is 15 to 20 years.\u003c\/p\u003e\n\u003cp align=\"left\"\u003e\u003cstrong\u003eSuction Capacity\u003c\/strong\u003e 20 vertical feet (6 m) at sea level – subtract 1 ft.. for every 1,000 ft. altitude (1 m for every 1,000 m). Pump should be placed as low as possible and gravity fed water is best.  Filters, angled joints, and small diameter pipe will all impact usable suction capacity.\u003c\/p\u003e\n\u003cp align=\"left\"\u003e\u003cstrong\u003ePerformance Range\u003c\/strong\u003e 20 feet of lift delivers 0.51 gpm using 40 PV watts.  Maximimum of 560 feet of lift delivers 0.2 gpm using 340 PV watts.\u003c\/p\u003e\n\u003cp align=\"left\"\u003e\u003cstrong\u003eFiltration Requirement\u003c\/strong\u003e This pump cannot tolerate dirt. Water must be filtered clear. If water is very dirty, improve the source.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePV-Direct (non-battery) Requirements\u003c\/strong\u003e The rated power of the PV array must exceed pump watts by 20% or more. See spec sheet for more info. A DSP200 Controller is required to start and run in low light. Ask about availability. 1\/2” female fittings.  Dimensions: 5.7\" x 17.375”, weight 12 lbs.\u003c\/p\u003e\n\u003cp align=\"left\"\u003eWarranty 1 year\u003c\/p\u003e","brand":"Dankoff","offers":[{"title":"Default Title","offer_id":42411732303935,"sku":"P-1322-24V","price":1099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/4611\/5647\/files\/P-2507.png?v=1767027027"},{"product_id":"slowpump-2507-12v","title":"Dankoff SlowPump 2507 – 12V","description":"\u003cp align=\"left\"\u003e\u003cstrong\u003eDankoff SlowPump 2507 - 12V\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003e\u003cspan style=\"color: #ff6600;\"\u003eThis product ships directly from the Manufacturer. A short lead time may apply.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eThe 2507 booster pump can draw water from shallow wells, springs, cisterns, tanks, ponds, rivers and streams, and push it as high as 140 vertical feet and through miles (kilometers) of pipeline. Slow pumping minimizes the size and cost of the solar array, wire and piping. SlowPumps are less expensive than submersible DC pumps, and made in a much wider range of sizes. Wearing parts typically last 5 to 10 years. Overall life expectancy is 15 to 20 years.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003e\u003cstrong\u003eSuction Capacity\u003c\/strong\u003e\r\n20 vertical feet (6 m) at sea level – subtract 1 ft.. for every 1,000 ft. altitude (1 m for every 1,000 m). Pump should be placed as low as possible and gravity fed water is best.  Filters, angled joints, and small diameter pipe will all impact usable suction capacity.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003e\u003cstrong\u003ePerformance Range\u003c\/strong\u003e\r\n20 feet of lift delivers 4.0 gpm using 80 PV watts.  Maximum of 140 feet of lift delivers 3.65 gpm using 245 PV watts.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003e\u003cstrong\u003eFiltration Requirement\u003c\/strong\u003e\r\nThis pump cannot tolerate dirt. Water must be filtered clear. If water is very dirty, improve the source.\u003c\/p\u003e\r\n\u003cstrong\u003ePV-Direct (non-battery) Requirements\u003c\/strong\u003e\r\nThe rated power of the PV array must exceed pump watts by 20% or more. See spec sheet for more info.\r\n\r\nA DSP200 Controller is required to start and run in low light. Ask about availability.\r\n\r\n3\/4\" male fittings.  Dimensions: 5.7\" x 17.375”, weight 13 lbs.\r\n\u003cp align=\"left\"\u003eOne year warranty\u003c\/p\u003e","brand":"Dankoff","offers":[{"title":"Default Title","offer_id":42411732369471,"sku":"P-2507-12V","price":1099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/4611\/5647\/files\/P-2507.png?v=1767027027"},{"product_id":"slowpump-2507-24v","title":"Dankoff SlowPump 2507 – 24V","description":"\u003cp align=\"left\"\u003e\u003cstrong\u003eDankoff SlowPump 2507 - 24V\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eThe 2507 booster pump can draw water from shallow wells, springs, cisterns, tanks, ponds, rivers and streams, and push it as high as 140 vertical feet and through miles (kilometers) of pipeline. Slow pumping minimizes the size and cost of the solar array, wire and piping. SlowPumps are less expensive than submersible DC pumps, and made in a much wider range of sizes. Wearing parts typically last 5 to 10 years. Overall life expectancy is 15 to 20 years.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003e\u003cstrong\u003eSuction Capacity\u003c\/strong\u003e\r\n20 vertical feet (6 m) at sea level – subtract 1 ft.. for every 1,000 ft. altitude (1 m for every 1,000 m). Pump should be placed as low as possible and gravity fed water is best.  Filters, angled joints, and small diameter pipe will all impact usable suction capacity.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003e\u003cstrong\u003ePerformance Range\u003c\/strong\u003e\r\n20 feet of lift delivers 4.0 gpm using 80 PV watts.  Maximum of 140 feet of lift delivers 3.65 gpm using 245 PV watts.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003e\u003cstrong\u003eFiltration Requirement\u003c\/strong\u003e\r\nThis pump cannot tolerate dirt. Water must be filtered clear. If water is very dirty, improve the source.\u003c\/p\u003e\r\n\u003cstrong\u003ePV-Direct (non-battery) Requirements\u003c\/strong\u003e\r\n\r\nThe rated power of the PV array must exceed pump watts by 20% or more. See spec sheet for more info.\r\n\r\nA DSP200 Controller is required to start and run in low light. Ask about availability.\r\n\r\n3\/4\" male fittings.  Dimensions: 5.7\" x 17.375”, weight 13 lbs.\r\n\u003cp align=\"left\"\u003eOne year warranty\u003c\/p\u003e","brand":"Dankoff","offers":[{"title":"Default Title","offer_id":42411732402239,"sku":"P-2507-24V","price":1099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/4611\/5647\/files\/P-2507.png?v=1767027027"},{"product_id":"flowlight-low-spd-24v-pump","title":"Flowlight Low Speed Booster Pump – Model 2910 – 12V, 24V or 48V","description":"\u003cp\u003e\u003cspan style=\"color: #ff6600;\"\u003eThis product ships directly from the Manufacturer. A short lead time may apply.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis rotary vane pressure pump uses one third to one half the energy of conventional AC pressure pumps and eliminates the high starting surges which push inverters to their limit.  The Low Speed Flowlight Model 2910 is available in 12, 24, or 48 volts DC.  Designed for use with battery banks; NOT solar direct.  These 16.5″ pumps are more powerful, quieter, and much more durable than the less expensive Shurflo diaphragm pumps.  Wearing parts are replaceable, and typically last 5 to 10 years.  Overall life expectancy is 15 to 20 years.  The Flowlight pumps are the BEST choice for pressurizing a full time off-grid residence.  A large pressure tank(40 gallons minimum), locally available, must be used.  We would also advise that this pump be installed in an outdoor pump house with your pressure tank, as the rotary vane action of the pump may be too noisy for some in home applications.\u003c\/p\u003e\n\u003cp align=\"left\"\u003ePump will deliver up to 2.7 gpm at 65 psi using 180 watts, to a maximum of 3.4 gpm at 30 psi using 120 watts.\u003c\/p\u003e\n\u003cp align=\"left\"\u003eThe EZFLOW Installation Kit and Inline Filter Kit are considered essential equipment and will make this pump simple for anyone to install and service. The Installation kit includes a pressure switch, pressure gauge, check valve, drain valve, T fitting, shut-off valve and pipe nipples.\u003c\/p\u003e\n\u003cp align=\"left\"\u003eThe Dry Run Switch prevents damage should your water source run dry. Essential protection if water shortage is a possibility as this pump will be ruined if it runs dry.  Do not allow this pump to run dry! Switch may be added at anytime.\u003c\/p\u003e\n\u003cp align=\"left\"\u003e16.5″ x 5″\u003cbr\u003e15 Lbs\u003c\/p\u003e\n\u003cp align=\"left\"\u003eOne year warranty.\u003c\/p\u003e","brand":"Dankoff","offers":[{"title":"Default Title","offer_id":42411732467775,"sku":"P-2910-24V","price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/4611\/5647\/files\/P-2930-48V-2.png?v=1765911123"},{"product_id":"flowlight-low-spd-48v-pump","title":"Flowlight Low Speed Booster Pump – Model 2910 – 12V, 24V or 48V","description":"\u003cp\u003e\u003cspan style=\"color: #ff6600;\"\u003eThis product ships directly from the Manufacturer. A short lead time may apply.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis rotary vane pressure pump uses one third to one half the energy of conventional AC pressure pumps and eliminates the high starting surges which push inverters to their limit.  The Low Speed Flowlight Model 2910 is available in 12, 24, or 48 volts DC.  Designed for use with battery banks; NOT solar direct.  These 16.5″ pumps are more powerful, quieter, and much more durable than the less expensive Shurflo diaphragm pumps.  Wearing parts are replaceable, and typically last 5 to 10 years.  Overall life expectancy is 15 to 20 years.  The Flowlight pumps are the BEST choice for pressurizing a full time off-grid residence.  A large pressure tank(40 gallons minimum), locally available, must be used.  We would also advise that this pump be installed in an outdoor pump house with your pressure tank, as the rotary vane action of the pump may be too noisy for some in home applications.\u003c\/p\u003e\n\u003cp align=\"left\"\u003ePump will deliver up to 2.7 gpm at 65 psi using 180 watts, to a maximum of 3.4 gpm at 30 psi using 120 watts.\u003c\/p\u003e\n\u003cp align=\"left\"\u003eThe EZFLOW Installation Kit and Inline Filter Kit are considered essential equipment and will make this pump simple for anyone to install and service. The Installation kit includes a pressure switch, pressure gauge, check valve, drain valve, T fitting, shut-off valve and pipe nipples.\u003c\/p\u003e\n\u003cp align=\"left\"\u003eThe Dry Run Switch prevents damage should your water source run dry. Essential protection if water shortage is a possibility as this pump will be ruined if it runs dry.  Do not allow this pump to run dry! Switch may be added at anytime.\u003c\/p\u003e\n\u003cp align=\"left\"\u003e16.5″ x 5″\u003cbr\u003e15 Lbs\u003c\/p\u003e\n\u003cp align=\"left\"\u003eOne year warranty.\u003c\/p\u003e","brand":"Dankoff","offers":[{"title":"12V","offer_id":42775122313279,"sku":"P-2910-12V","price":999.0,"currency_code":"USD","in_stock":true},{"title":"24V","offer_id":42775122346047,"sku":"P-2910-24V","price":999.0,"currency_code":"USD","in_stock":true},{"title":"48V","offer_id":42775122378815,"sku":"P-2910-48V","price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/4611\/5647\/files\/P-2930-48V-1.png?v=1765911121"},{"product_id":"flowlight-std-spd-24v-pump","title":"Flowlight Standard Speed Booster Pump – Model 2920 – 12V, 24V or 48V","description":"\u003cp\u003e\u003cspan style=\"color: #ff6600;\"\u003eThis product ships directly from the Manufacturer. A short lead time may apply.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis rotary vane pressure pump uses one third to one half the energy of conventional AC pressure pumps and eliminates the high starting surges which push inverters to their limit.  The Standard Speed Flowlight Model 2920 is available in 12, 24, or 48 volts DC, or 115volts AC.  Designed for use with battery banks, or an AC source; NOT solar direct.  These 16.5″ pumps are more powerful, quieter, and much more durable than the less expensive Shurflo diaphragm pumps.  Wearing parts are replaceable, and typically last 5 to 10 years.  Overall life expectancy is 15 to 20 years.  The Flowlight pumps are the BEST choice for pressurizing a full time off-grid residence.  A large pressure tank (40 gallons minimum), locally available, must be used.  We would also advise that this pump be installed in an outdoor pump house with your pressure tank, as the rotary vane action of the pump may be too noisy for some in home applications\u003c\/p\u003e\n\u003cp align=\"left\"\u003eDC Pumps will deliver up to 4.1 gpm at 65 psi using 264 watts, to a maximum of 4.5 gpm at 30 psi using 156 watts.\u003c\/p\u003e\n\u003cp align=\"left\"\u003eThe EZFLOW Installation Kit and Inline Filter Kit are considered essential equipment and will make this pump simple for anyone to install and service. The Installation kit includes a pressure switch, pressure gauge, check valve, drain valve, T fitting, shut-off valve and pipe nipples.\u003c\/p\u003e\n\u003cp align=\"left\"\u003eThe Dry Run Switch prevents damage should your water source run dry. Essential protection if water shortage is a possibility as this pump will be ruined if it runs dry.  Do not allow this pump to run dry!  May be added at anytime.\u003c\/p\u003e\n\u003cp align=\"left\"\u003e16.5″ x 5″\u003cbr\u003e15 Lbs\u003c\/p\u003e\n\u003cp align=\"left\"\u003eOne year warranty.\u003c\/p\u003e","brand":"Dankoff","offers":[{"title":"12","offer_id":42801405231167,"sku":"P-2920-12","price":1079.0,"currency_code":"USD","in_stock":true},{"title":"24","offer_id":42801405263935,"sku":"P-2920-24","price":1079.0,"currency_code":"USD","in_stock":true},{"title":"48","offer_id":42801405296703,"sku":"P-2920-48","price":1079.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/4611\/5647\/files\/P-2930-48V-3.png?v=1765911122"},{"product_id":"flowlight-std-spd-48v-pump","title":"Flowlight Standard Speed Booster Pump – Model 2920 – 12V, 24V or 48V","description":"\u003cp\u003e\u003cspan style=\"color: #ff6600;\"\u003eThis product ships directly from the Manufacturer. A short lead time may apply.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis rotary vane pressure pump uses one third to one half the energy of conventional AC pressure pumps and eliminates the high starting surges which push inverters to their limit.  The Standard Speed Flowlight Model 2920 is available in 12, 24, or 48 volts DC, or 115volts AC.  Designed for use with battery banks, or an AC source; NOT solar direct.  These 16.5″ pumps are more powerful, quieter, and much more durable than the less expensive Shurflo diaphragm pumps.  Wearing parts are replaceable, and typically last 5 to 10 years.  Overall life expectancy is 15 to 20 years.  The Flowlight pumps are the BEST choice for pressurizing a full time off-grid residence.  A large pressure tank (40 gallons minimum), locally available, must be used.  We would also advise that this pump be installed in an outdoor pump house with your pressure tank, as the rotary vane action of the pump may be too noisy for some in home applications\u003c\/p\u003e\n\u003cp align=\"left\"\u003eDC Pumps will deliver up to 4.1 gpm at 65 psi using 264 watts, to a maximum of 4.5 gpm at 30 psi using 156 watts.\u003c\/p\u003e\n\u003cp align=\"left\"\u003eThe EZFLOW Installation Kit and Inline Filter Kit are considered essential equipment and will make this pump simple for anyone to install and service. The Installation kit includes a pressure switch, pressure gauge, check valve, drain valve, T fitting, shut-off valve and pipe nipples.\u003c\/p\u003e\n\u003cp align=\"left\"\u003eThe Dry Run Switch prevents damage should your water source run dry. Essential protection if water shortage is a possibility as this pump will be ruined if it runs dry.  Do not allow this pump to run dry!  May be added at anytime.\u003c\/p\u003e\n\u003cp align=\"left\"\u003e16.5″ x 5″\u003cbr\u003e15 Lbs\u003c\/p\u003e\n\u003cp align=\"left\"\u003eOne year warranty.\u003c\/p\u003e","brand":"Dankoff","offers":[{"title":"12V","offer_id":42774899195967,"sku":"P-2920-12V","price":899.0,"currency_code":"USD","in_stock":true},{"title":"24V","offer_id":42774899228735,"sku":"P-2920-24V","price":1079.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/4611\/5647\/files\/P-2930-48V-1.png?v=1765911121"},{"product_id":"flowlight-std-spd-120v-pump","title":"Flowlight Standard Speed 120V AC Booster Pump – Model 2920-AC","description":"\u003cstrong\u003eFlowlight Standard Speed 120V AC Booster Pump - Model 2920-AC\u003c\/strong\u003e\r\n\r\n\u003cspan style=\"color: #ff6600;\"\u003eThis product ships directly from the Manufacturer. A short lead time may apply.\u003c\/span\u003e\r\n\r\nThis rotary vane pressure pump uses one third to one half the energy of conventional AC pressure pumps and eliminates the high starting surges which push inverters to their limit.  The Standard Speed Flowlight Model 2920 is available in 12, 24, or 48 volts DC, or 115volts AC.  Designed for use with battery banks, or an AC source; NOT solar direct.  These 16.5\" pumps are more powerful, quieter, and much more durable than the less expensive Shurflo diaphragm pumps.  Wearing parts are replaceable, and typically last 5 to 10 years.  Overall life expectancy is 15 to 20 years.  The Flowlight pumps are the BEST choice for pressurizing a full time off-grid residence.  A large pressure tank(40 gallons minimum), locally available, must be used.  We would also advise that this pump be installed in an outdoor pump house with your pressure tank, as the rotary vane action of the pump may be too noisy for some in home applications.\r\n\u003cp align=\"left\"\u003eDC Pumps will deliver up to 4.1 gpm at 65 psi using 264 watts, to a maximum of 4.5 gpm at 30 psi using 156 watts.\r\nThe AC model will deliver up to 4.1 gpm at 65 psi using 334 watts, to a maximum of 4.5 gpm at 30 psi using 196 watts.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eThe EZFLOW Installation Kit and Inline Filter Kit are considered essential equipment and will make this pump simple for anyone to install and service. The Installation kit includes a pressure switch, pressure gauge, check valve, drain valve, T fitting, shut-off valve and pipe nipples.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eThe Dry Run Switch prevents damage should your water source run dry. Essential protection if water shortage is a possibility as this pump will be ruined if it runs dry.  Do not allow this pump to run dry! A Dry Run Switch may be added at anytime.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003e16.5\" x 5\"\r\n15 Lbs\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eOne year warranty.\u003c\/p\u003e","brand":"Dankoff","offers":[{"title":"Default Title","offer_id":42411732762687,"sku":"P-2920-AC","price":1359.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/4611\/5647\/files\/P-2930-48V-8.png?v=1765911119"},{"product_id":"flowlight-std-spd-1-2hp-48v-pump","title":"Flowlight Standard Speed (1\/2HP) 48V Booster Pump – Model 2930-48","description":"\u003cstrong\u003eFlowlight Standard Speed (1\/2HP) 48V Booster Pump - Model 2930-48\u003c\/strong\u003e\r\n\r\nThis rotary vane pressure pump uses one third to one half the energy of conventional AC pressure pumps and eliminates the high starting surges which push inverters to their limit.  Flowlight Model 2930 is only available in 48 volts DC.  Designed for use with battery banks; NOT solar direct. These 16.5\" pumps are more powerful, quieter, and much more durable than the less expensive Shurflo diaphragm pumps.  Wearing parts are replaceable, and typically last 5 to 10 years.  Overall life expectancy is 15 to 20 years.  The Flowlight pumps are the BEST choice for pressurizing a full time off-grid residence.  A large pressure tank(40 gallons minimum), locally available, must be used.  We would also advise that this pump be installed in an outdoor pump house with your pressure tank, as the rotary vane action of the pump may be too noisy for some in home applications.\r\n\u003cp align=\"left\"\u003eDC Pumps will deliver up to 5.0 gpm at 65 psi using 264 watts.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eThe EZFLOW Installation Kit and Inline Filter Kit are considered essential equipment and will make this pump simple for anyone to install and service. The Installation kit includes a pressure switch, pressure gauge, check valve, drain valve, T fitting, shut-off valve and pipe nipples.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eThe Dry Run Switch prevents damage should your water source run dry. Essential protection if water shortage is a possibility as this pump will be ruined if it runs dry.  \u003cem\u003eDo not allow this pump to run dry!\u003c\/em\u003e  Dry Run Switch may be added at anytime.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003e16.5\" x 5\"\r\n15 Lbs\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eOne year warranty.\u003c\/p\u003e","brand":"Dankoff","offers":[{"title":"Default Title","offer_id":42411732795455,"sku":"P-2930-48V","price":1449.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/4611\/5647\/files\/P-2930-48V-8.png?v=1765911119"},{"product_id":"solarforce-12v-pump-5gpm-60-psi-1-4hp","title":"SolarForce 12V Pump - 5gpm 60 PSI 1\/4hp","description":"\u003cstrong\u003eSolarForce 5gpm 60 PSI 1\/4hp 12V Battery\u003c\/strong\u003e\r\n\r\n\u003cspan style=\"color: #ff6600;\"\u003eThis product ships directly from the Manufacturer. A short lead time may apply.\u003c\/span\u003e\r\n\r\n12 volt battery based Solar Force piston pump, pumps more water with less power. Outlasts 10 small diaphragm pumps. Tolerates dirty water. Life expectancy is 20 years with 2 to 6 year owner performed maintenance schedule. Cast iron body, brass cylinder and valve seats, oil bath crankcase, and pressure relief valve. Seal and belt, and long term parts kits available for field servicing.\r\n\u003cp align=\"left\"\u003eIdeal configuration is to have input primed from a gravity fed source.  Alternatively, the pump can lift water from a shallow well.  Foot valve is required for suction lift. Maximum 22 feet suction.  Subtract 1 foot of lift for every 1000 feet above sea level.  Inlet 1-1\/4\" female pipe thread, outlet 1\" female pipe thread.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eMaximum lift of 140 feet (60 psi) delivers 4.9 gallons per minute using 226 watts.   Minimum 60 gallon tank recommended for pressure tank applications.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003e23\" x 13\" x 16\"\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eTwo year warranty.\u003c\/p\u003e","brand":"Dankoff","offers":[{"title":"Default Title","offer_id":42411732828223,"sku":"P-3010-12V","price":3329.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/4611\/5647\/files\/SolarForcePump.png?v=1763927436"},{"product_id":"solarforce-24v-pump-5gpm-60-psi-1-4hp","title":"SolarForce 24V Pump - 5gpm 60 PSI 1\/4hp","description":"\u003cstrong\u003eSolarForce 5gpm 60 PSI 1\/4hp 24V Battery\u003c\/strong\u003e\r\n\r\n\u003cspan style=\"color: #ff6600;\"\u003eThis product ships directly from the Manufacturer. A short lead time may apply.\u003c\/span\u003e\r\n\r\n24 volt battery based Solar Force piston pump, pumps more water with less power. Outlasts 10 small diaphragm pumps. Tolerates dirty water. Life expectancy is 20 years with 2 to 6 year owner performed maintenance schedule. Cast iron body, brass cylinder and valve seats, oil bath crankcase, and pressure relief valve. Seal and belt, and long term parts kits available for field servicing.\r\n\u003cp align=\"left\"\u003eIdeal configuration is to have input primed from a gravity fed source.  Alternatively, the pump can lift water from a shallow well.  Foot valve is required for suction lift. Maximum 22 feet suction.  Subtract 1 foot of lift for every 1000 feet above sea level.  Inlet 1-1\/4\" female pipe thread, outlet 1\" female pipe thread.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eMaximum lift of 140 feet (60 psi) delivers 4.9 gallons per minute using 226 watts.   Minimum 60 gallon tank recommended for pressure tank applications.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003e23\" x 13\" x 16\"\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eTwo year warranty.\u003c\/p\u003e","brand":"Dankoff","offers":[{"title":"Default Title","offer_id":42411732860991,"sku":"P-3010-24V","price":3329.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/4611\/5647\/files\/SolarForcePump.png?v=1763927436"},{"product_id":"solarforce-48v-pump-5gpm-60-psi-1-4hp","title":"SolarForce 48V Pump - 5gpm 60 PSI 1\/4hp","description":"\u003cstrong\u003eSolarForce 5gpm 60 PSI 1\/4hp 48V Battery\u003c\/strong\u003e\r\n\r\n\u003cspan style=\"color: #ff6600;\"\u003eThis product ships directly from the Manufacturer. A short lead time may apply.\u003c\/span\u003e\r\n\r\n48 volt battery based Solar Force piston pump, pumps more water with less power. Outlasts 10 small diaphragm pumps. Tolerates dirty water. Life expectancy is 20 years with 2 to 6 year owner performed maintenance schedule. Cast iron body, brass cylinder and valve seats, oil bath crankcase, and pressure relief valve. Seal and belt, and long term parts kits available for field servicing.\r\n\u003cp align=\"left\"\u003eIdeal configuration is to have input primed from a gravity fed source.  Alternatively, the pump can lift water from a shallow well.  Foot valve is required for suction lift. Maximum 22 feet suction.  Subtract 1 foot of lift for every 1000 feet above sea level.  Inlet 1-1\/4\" female pipe thread, outlet 1\" female pipe thread.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eMaximum lift of 140 feet (60 psi) delivers 4.9 gallons per minute using 226 watts.   Minimum 60 gallon tank recommended for pressure tank applications.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003e23\" x 13\" x 16\"\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eTwo year warranty.\u003c\/p\u003e","brand":"Dankoff","offers":[{"title":"Default Title","offer_id":42411732893759,"sku":"P-3010-48V","price":3329.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/4611\/5647\/files\/SolarForcePump.png?v=1763927436"},{"product_id":"solarforce-5gpm-100psi-1-2hp-12v","title":"SolarForce 5gpm 100PSI 1\/2hp 12V","description":"\u003cstrong\u003eSolarForce 5gpm 100PSI 1\/2hp 12V Battery\u003c\/strong\u003e\r\n\r\n12 volt battery based Solar Force piston pump, pumps more water with less power. Outlasts 10 small diaphragm pumps. Tolerates dirty water. Life expectancy is 20 years with 2 to 6 year owner performed maintenance schedule. Cast iron body, brass cylinder and valve seats, oil bath crankcase, and pressure relief valve. Seal and belt, and long term parts kits available for field servicing.\r\n\u003cp align=\"left\"\u003eIdeal configuration is to have input primed from a gravity fed source.  Alternatively, the pump can lift water from a shallow well.  Foot valve is required for suction lift. Maximum 22 feet suction.  Subtract 1 foot of lift for every 1000 feet above sea level.  Inlet 1-1\/4\" female pipe thread, outlet 1\" female pipe thread.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eMaximum lift of 220 feet (100 psi) delivers 4.7 gallons per minute using 314 watts.   Minimum 60 gallon tank recommended for pressure tank applications.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003e23\" x 13\" x 16\"\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eTwo year warranty.\u003c\/p\u003e","brand":"Dankoff","offers":[{"title":"Default Title","offer_id":42411732926527,"sku":"P-3020-12V","price":3329.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/4611\/5647\/files\/SolarForcePump.png?v=1763927436"},{"product_id":"solarforce-5gpm-100psi-1-2hp-24v","title":"SolarForce 5gpm 100PSI 1\/2hp 24V","description":"\u003cstrong\u003eSolarForce 5gpm 100PSI 1\/2hp 24V Battery\u003c\/strong\u003e\r\n\r\n24 volt battery based Solar Force piston pump, pumps more water with less power. Outlasts 10 small diaphragm pumps. Tolerates dirty water. Life expectancy is 20 years with 2 to 6 year owner performed maintenance schedule. Cast iron body, brass cylinder and valve seats, oil bath crankcase, and pressure relief valve. Seal and belt, and long term parts kits available for field servicing.\r\n\u003cp align=\"left\"\u003eIdeal configuration is to have input primed from a gravity fed source.  Alternatively, the pump can lift water from a shallow well.  Foot valve is required for suction lift. Maximum 22 feet suction.  Subtract 1 foot of lift for every 1000 feet above sea level.  Inlet 1-1\/4\" female pipe thread, outlet 1\" female pipe thread.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eMaximum lift of 220 feet (100 psi) delivers 4.7 gallons per minute using 314 watts.   Minimum 60 gallon tank recommended for pressure tank applications.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003e23\" x 13\" x 16\"\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eTwo year warranty.\u003c\/p\u003e","brand":"Dankoff","offers":[{"title":"Default Title","offer_id":42411732959295,"sku":"P-3020-24V","price":3159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/4611\/5647\/files\/SolarForcePump.png?v=1763927436"},{"product_id":"solarforce-5gpm-100psi-1-2hp-48v","title":"SolarForce 5gpm 100PSI 1\/2hp 48V","description":"\u003cstrong\u003eSolarForce 5gpm 100PSI 1\/2hp 48V Battery\u003c\/strong\u003e\r\n\r\n48 volt battery based Solar Force piston pump, pumps more water with less power. Outlasts 10 small diaphragm pumps. Tolerates dirty water. Life expectancy is 20 years with 2 to 6 year owner performed maintenance schedule. Cast iron body, brass cylinder and valve seats, oil bath crankcase, and pressure relief valve. Seal and belt, and long term parts kits available for field servicing.\r\n\u003cp align=\"left\"\u003eIdeal configuration is to have input primed from a gravity fed source.  Alternatively, the pump can lift water from a shallow well.  Foot valve is required for suction lift. Maximum 22 feet suction.  Subtract 1 foot of lift for every 1000 feet above sea level.  Inlet 1-1\/4 inch, outlet 1 inch pipe thread.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eMaximum lift of 230 feet (100 psi) delivers 4.7 gallons per minute using 314 watts.   Minimum 60 gallon tank recommended for pressure tank applications.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003e23\" x 13\" x 16\"\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eTwo year warranty.\u003c\/p\u003e","brand":"Dankoff","offers":[{"title":"Default Title","offer_id":42411732992063,"sku":"P-3020-48V","price":3299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/4611\/5647\/files\/SolarForcePump.png?v=1763927436"},{"product_id":"solarforce-5gpm-100psi-1-2hp-115vac","title":"SolarForce 5gpm 100PSI 1\/2hp 115VAC","description":"\u003cstrong\u003eSolarForce 5gpm 100PSI 1\/2hp 115VAC\u003c\/strong\u003e\r\n\r\n\u003cspan style=\"color: #ff6600;\"\u003eThis product ships directly from the Manufacturer. A short lead time may apply.\u003c\/span\u003e\r\n\r\n120 volt AC Solar Force piston pump, pumps more water with less power. Outlasts 10 small diaphragm pumps. Tolerates dirty water. Life expectancy is 20 years with 2 to 6 year owner performed maintenance schedule. Cast iron body, brass cylinder and valve seats, oil bath crankcase, and pressure relief valve. Seal and belt, and long term parts kits available for field servicing.\r\n\u003cp align=\"left\"\u003eIdeal configuration is to have input primed from a gravity fed source.  Alternatively, the pump can lift water from a shallow well.  Foot valve is required for suction lift. Maximum 22 feet suction.  Subtract 1 foot of lift for every 1000 feet above sea level.  Inlet 1-1\/4\" female pipe thread, outlet 1\" female pipe thread.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eMaximum lift of 220 feet (100 psi) delivers 4.7 gallons per minute using 314 watts.   Minimum 60 gallon tank recommended for pressure tank applications.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003e23\" x 13\" x 16\"\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eTwo year warranty.\u003c\/p\u003e","brand":"Dankoff","offers":[{"title":"Default Title","offer_id":42411733024831,"sku":"P-3020-AC","price":3199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/4611\/5647\/files\/SolarForcePump.png?v=1763927436"},{"product_id":"solarforce-9gpm-60-psi-1-2hp-12v","title":"SolarForce 9gpm 60 PSI 1\/2hp 12V","description":"\u003cstrong\u003eSolarForce 9gpm 60 PSI 1\/2hp 12V Battery\u003c\/strong\u003e\r\n\r\n12 volt battery based Solar Force piston pump, pumps more water with less power. Outlasts 10 small diaphragm pumps. Tolerates dirty water. Life expectancy is 20 years with 2 to 6 year owner performed maintenance schedule. Cast iron body, brass cylinder and valve seats, oil bath crankcase, and pressure relief valve. Seal and belt, and long term parts kits available for field servicing.\r\n\u003cp align=\"left\"\u003eIdeal configuration is to have input primed from a gravity fed source.  Alternatively, the pump can lift water from a shallow well.  Foot valve is required for suction lift. Maximum 25 feet suction.  Subtract 1 foot of lift for every 1000 feet above sea level. Inlet 1-1\/4\" female pipe thread, outlet 1 inch pipe thread.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eMaximum lift of 140 feet (60 psi) delivers 9.1 gallons per minute using 403 watts. Minimum 60 gallon tank recommended for pressure tank applications.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003e22\" x 13\" x 16\"\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eTwo year warranty.\u003c\/p\u003e","brand":"Dankoff","offers":[{"title":"Default Title","offer_id":42411733057599,"sku":"P-3040-12V","price":3359.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/4611\/5647\/files\/SolarForcePump.png?v=1763927436"},{"product_id":"solarforce-9gpm-60-psi-1-2hp-24v","title":"SolarForce 9gpm 60 PSI 1\/2hp 24V","description":"\u003cstrong\u003eSolarForce 9gpm 60 PSI 1\/2hp 24V Battery\u003c\/strong\u003e\r\n\r\n24 volt battery based Solar Force piston pump, pumps more water with less power. Outlasts 10 small diaphragm pumps. Tolerates dirty water. Life expectancy is 20 years with 2 to 6 year owner performed maintenance schedule. Cast iron body, brass cylinder and valve seats, oil bath crankcase, and pressure relief valve. Seal and belt, and long term parts kits available for field servicing.\r\n\u003cp align=\"left\"\u003eIdeal configuration is to have input primed from a gravity fed source.  Alternatively, the pump can lift water from a shallow well.  Foot valve is required for suction lift. Maximum 25 feet suction.  Subtract 1 foot of lift for every 1000 feet above sea level. Inlet 1-1\/4\" female pipe thread, outlet 1 inch pipe thread.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eMaximum lift of 140 feet (60 psi) delivers 9.1 gallons per minute using 403 watts. Minimum 60 gallon tank recommended for pressure tank applications.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003e22\" x 13\" x 16\"\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eTwo year warranty.\u003c\/p\u003e","brand":"Dankoff","offers":[{"title":"Default Title","offer_id":42411733090367,"sku":"P-3040-24V","price":3259.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/4611\/5647\/files\/SolarForcePump.png?v=1763927436"},{"product_id":"solarforce-9gpm-60-psi-1-2hp-115vac","title":"SolarForce 9gpm 60 PSI 1\/2hp 115VAC","description":"\u003cstrong\u003eSolarForce 9gpm 60 PSI 1\/2hp 115 VAC\u003c\/strong\u003e\r\n\r\n120 volt AC Solar Force piston pump, pumps more water with less power. Outlasts 10 small diaphragm pumps. Tolerates dirty water. Life expectancy is 20 years with 2 to 6 year owner performed maintenance schedule. Cast iron body, brass cylinder and valve seats, oil bath crankcase, and pressure relief valve. Seal and belt, and long term parts kits available for field servicing.\r\n\u003cp align=\"left\"\u003eIdeal configuration is to have input primed from a gravity fed source.  Alternatively, the pump can lift water from a shallow well.  Foot valve is required for suction lift. Maximum 25 feet suction.  Subtract 1 foot of lift for every 1000 feet above sea level. Inlet 1-1\/4\" female pipe thread, outlet 1\" female pipe thread.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eMaximum lift of 140 feet (60 psi) delivers 9.1 gallons per minute using 403 watts. Minimum 60 gallon tank recommended for pressure tank applications.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003e22\" x 13\" x 16\"\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eTwo year warranty.\u003c\/p\u003e","brand":"Dankoff","offers":[{"title":"Default Title","offer_id":42411733123135,"sku":"P-3040-AC","price":3299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/4611\/5647\/files\/SolarForcePump.png?v=1763927436"},{"product_id":"solarforce-9gpm-60-psi-1-2hp-48v","title":"SolarForce 9gpm 60 PSI 1\/2hp 48V","description":"\u003cstrong\u003eSolarForce 9gpm 60 PSI 1\/2hp 48V Battery\u003c\/strong\u003e\r\n\r\n48 volt battery based Solar Force piston pump, pumps more water with less power. Outlasts 10 small diaphragm pumps. Tolerates dirty water. Life expectancy is 20 years with 2 to 6 year owner performed maintenance schedule. Cast iron body, brass cylinder and valve seats, oil bath crankcase, and pressure relief valve. Seal and belt, and long term parts kits available for field servicing.\r\n\u003cp align=\"left\"\u003eIdeal configuration is to have input primed from a gravity fed source.  Alternatively, the pump can lift water from a shallow well.  Foot valve is required for suction lift. Maximum 25 feet suction.  Subtract 1 foot of lift for every 1000 feet above sea level. Inlet 1-1\/4\" female pipe thread, outlet 1 inch pipe thread.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eMaximum lift of 140 feet (60 psi) delivers 9.1 gallons per minute using 403 watts. Minimum 60 gallon tank recommended for pressure tank applications.\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003e22\" x 13\" x 16\"\u003c\/p\u003e\r\n\u003cp align=\"left\"\u003eTwo year warranty.\u003c\/p\u003e","brand":"Dankoff","offers":[{"title":"Default Title","offer_id":42411733188671,"sku":"P-3040-48V","price":3499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/4611\/5647\/files\/SolarForcePump.png?v=1763927436"},{"product_id":"aquatec-550-12v-pump-fortified","title":"Aquatec 550 - 12V Pump, Fortified","description":"\u003cstrong\u003eAquatec 550 Series Booster Pump, 12 Volt Version 2\u003c\/strong\u003e\r\n\r\n\u003cstrong\u003eNow \"fortified\" to IP65 which further resists mois0ture and dust. 1\/2\" barbed intake and outlet port fittings included.\u003c\/strong\u003e\r\n\r\nA medium duty booster pump, the 550 series are appropriate for applications that include drawing water from a holding tank or shallow water source and pressurizing household plumbing; as well as moving water from one location, over distance or uphill, to another location.\r\n\r\n\u003cstrong\u003e**PLEASE NOTE, THIS PUMP SHOULD ONLY BE USED WITH A 5 GALLON OR LARGER PRESSURE TANK**\u003c\/strong\u003e\r\n\r\nA booster pump is intended to be placed near the water source with a maximum draw on the intake side of 13 feet of lift (de-rate by 1' for every 1000' above sea level). Despite this capability, Backwoods always recommends a foot valve on the intake pipe when drawing water up from a source, to help keep the intake primed.  An optimum configuration would be to supply gravity fed water from an elevated holding tank or cistern to the pump's intake to drive household's pressure tank and plumbing.\r\n\r\nBackwoods features a model that includes a standard 5 chamber diaphragm pump head, a permanent magnet motor, quick disconnect inlet\/outlet ports, and a built-in pressure switch(cut-in at ~45 psi, shut-off at 60 psi). Now \"fortified\" to IP65 which further resists moisture and dust. \u003cspan style=\"color: #0000ff;\"\u003e\u003ca style=\"color: #0000ff;\" href=\"https:\/\/backwoodssolar.com\/product\/aquatec-straight-1-2-male-barbed-2\/\"\u003e1\/2\" barbed intake\u003c\/a\u003e\u003c\/span\u003e and outlet port fittings included. Order our P-EZ kit separately if desired.  The built-in pressure switch is NOT adjustable.  Backwoods has an external Square D pressure switch that can be used instead, to operate the pump at lower, adjustable pressure settings for lower power consumption.\r\n\r\nThe 550 is a higher volume booster pump, capable of 5.3 gallons per minute at no head\/pressure; and a maximum pressure capability of 70 psi(the equivalent of 161' of lift) with a delivery of 3 gallons per minute.  At half power, the pumps can run for extended periods of at least a couple of hours with no heat concerns; BUT running at higher pressures than ~25 psi should be limited to runs of 25 minutes at a time to avoid overheating.  This is a possible issue to consider with very large pressure tanks that take a long time to fill, but easily avoided with a small to medium pressure tank that can be charged to full in 10 minutes or less.\r\n\r\nPower draw at no head is 5.5 amps, up to 18 amps at 70 psi.\r\n\r\nAlthough newly fortified, the diaphragm pump head does have parts that will wear out over time and are field serviceable. Backwoods stocks the most commonly needed Lower Housing Assembly that includes the diaphragm and \"wobble\" bearing, and the Valve Housing Assembly that has the actual valve manifold.  Typical service life for these parts are 2 to 5 years.  Reduced GPM volumes over time indicate that the diaphragm and valves are suffering wear. This pump is capable of being run dry.\r\n\r\nMeasures 10\" L x 4.5\" H x 5\" W\r\nWeighs 7 lbs.\r\n\r\nConsider also ordering:\r\n\u003cspan style=\"color: #0000ff;\"\u003e\u003ca style=\"color: #0000ff;\" href=\"https:\/\/backwoodssolar.com\/product\/ez-pump-kit-4clamps-15-hose-2\/\"\u003eP-EZ hose and hose clamp connection kit\u003c\/a\u003e\u003c\/span\u003e\r\n\u003cspan style=\"color: #0000ff;\"\u003e\u003ca style=\"color: #0000ff;\" href=\"https:\/\/backwoodssolar.com\/product\/aquatec-550-pump-strainer\/\"\u003eP-AQUA-550-FILT intake strainer\u003c\/a\u003e\u003c\/span\u003e\r\n\u003cspan style=\"color: #0000ff;\"\u003e\u003ca style=\"color: #0000ff;\" href=\"https:\/\/backwoodssolar.com\/product\/aquatec-550-valve-housing-assembly\/\"\u003eP-AQUA-550-VHA valve housing\u003c\/a\u003e\u003c\/span\u003e\r\n\u003cspan style=\"color: #0000ff;\"\u003e\u003ca style=\"color: #0000ff;\" href=\"https:\/\/backwoodssolar.com\/product\/aquatec-550-lower-housing-assembly\/\"\u003eP-AQUA-550-LHA lower housing assembly\u003c\/a\u003e\u003c\/span\u003e\r\n\u003cspan style=\"color: #0000ff;\"\u003e\u003ca style=\"color: #0000ff;\" href=\"https:\/\/backwoodssolar.com\/product\/square-d-pressure-switch\/\"\u003eP-PS-SQD external, adjustable pressure switch\u003c\/a\u003e\u003c\/span\u003e\r\n\r\nWarranty: 12 months from date of purchase.","brand":"Aquatec","offers":[{"title":"Default Title","offer_id":42411733385279,"sku":"P-AQ550-12-P-V2","price":138.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/4611\/5647\/files\/P-AQ550-AC-P-V2.png?v=1763417235"},{"product_id":"aquatec-550-24v-pump-fortified","title":"Aquatec 550 - 24V Pump, Fortified","description":"\u003cstrong\u003eAquatec 550 Series Booster Pump, 24 Volt Version 2\u003c\/strong\u003e\r\n\r\n\u003cstrong\u003eNow \"fortified\" to IP65 which further resists mois0ture and dust. 1\/2\" barbed intake and outlet port fittings included.\u003c\/strong\u003e\r\n\r\nA medium duty booster pump, the 550 series are appropriate for applications that include drawing water from a holding tank or shallow water source and pressurizing household plumbing; as well as moving water from one location, over distance or uphill, to another location.\r\n\r\n\u003cstrong\u003e**PLEASE NOTE, THIS PUMP SHOULD ONLY BE USED WITH A 5 GALLON OR LARGER PRESSURE TANK**\u003c\/strong\u003e\r\n\r\nA booster pump is intended to be placed near the water source with a maximum draw on the intake side of 13 feet of lift (de-rate by 1' for every 1000' above sea level). Despite this capability, Backwoods always recommends a foot valve on the intake pipe when drawing water up from a source, to help keep the intake primed.  An optimum configuration would be to supply gravity fed water from an elevated holding tank or cistern to the pump's intake to drive household's pressure tank and plumbing.\r\n\r\nBackwoods features a model that includes a standard 5 chamber diaphragm pump head, a permanent magnet motor, quick disconnect inlet\/outlet ports, and a built-in pressure switch (cut-in at ~45 psi, shut-off at 60 psi).  Now \"fortified\" to IP65 which further resists moisture and dust. \u003cspan style=\"color: #0000ff;\"\u003e\u003ca style=\"color: #0000ff;\" href=\"https:\/\/backwoodssolar.com\/product\/aquatec-straight-1-2-male-barbed-2\/\"\u003e1\/2\" barbed intake\u003c\/a\u003e\u003c\/span\u003e and outlet port fittings included. Order our P-EZ kit separately if desired.  The built-in pressure switch is NOT adjustable.  Backwoods has an external Square D pressure switch that can be used instead, to operate the pump at lower, adjustable pressure settings for lower power consumption.\r\n\r\nThe 550 is a higher volume booster pump, capable of 5.15 gallons per minute at no head\/pressure; and a maximum pressure capability of 70 psi(the equivalent of 161' of lift) with a delivery of 3.1 gallons per minute.  At half power, the pumps can run for extended periods of at least a couple of hours with no heat concerns; BUT running at higher pressures than ~25 psi should be limited to runs of 25 minutes at a time to avoid overheating. This is a possible issue to consider with very large pressure tanks that take a long time to fill, but easily avoided with a small to medium pressure tank that can be charged to full in 10 minutes or less.\r\n\r\n\u003cstrong\u003e\u003cem\u003e(Note: This pump does NOT have thermal protection as mentioned in spec sheet. Pump will overheat if run above half power for extended periods of time, as described above.) \u003c\/em\u003e\u003c\/strong\u003e\r\n\r\nPower draw at no head is 3.0 amps, up to 8.5 amps at 70 psi.\r\n\r\nAlthough newly fortified, the diaphragm pump head does have parts that will wear out over time and are field serviceable. Backwoods stocks the most commonly needed Lower Housing Assembly that includes the diaphragm and \"wobble\" bearing, and the Valve Housing Assembly that has the actual valve manifold.  Typical service life for these parts are 2 to 5 years.  Reduced GPM volumes over time indicate that the diaphragm and valves are suffering wear.  This pump is capable of being run dry.\r\n\r\nMeasures 10\" L x 4.5\" H x 5\" W\r\nWeighs 7 lbs.\r\n\r\nConsider also ordering:\r\n\u003cspan style=\"color: #0000ff;\"\u003e\u003ca style=\"color: #0000ff;\" href=\"https:\/\/backwoodssolar.com\/product\/ez-pump-kit-4clamps-15-hose-2\/\"\u003eP-EZ hose and hose clamp connection kit\u003c\/a\u003e\u003c\/span\u003e\r\n\u003cspan style=\"color: #0000ff;\"\u003e\u003ca style=\"color: #0000ff;\" href=\"https:\/\/backwoodssolar.com\/product\/aquatec-550-pump-strainer\/\"\u003eP-AQUA-550-FILT intake strainer\u003c\/a\u003e\u003c\/span\u003e\r\n\u003cspan style=\"color: #0000ff;\"\u003e\u003ca style=\"color: #0000ff;\" href=\"https:\/\/backwoodssolar.com\/product\/aquatec-550-valve-housing-assembly\/\"\u003eP-AQUA-550-VHA valve housing\u003c\/a\u003e\u003c\/span\u003e\r\n\u003cspan style=\"color: #0000ff;\"\u003e\u003ca style=\"color: #0000ff;\" href=\"https:\/\/backwoodssolar.com\/product\/aquatec-550-lower-housing-assembly\/\"\u003eP-AQUA-550-LHA lower housing assembly\u003c\/a\u003e\u003c\/span\u003e\r\n\u003cspan style=\"color: #0000ff;\"\u003e\u003ca style=\"color: #0000ff;\" href=\"https:\/\/backwoodssolar.com\/product\/square-d-pressure-switch\/\"\u003eP-PS-SQD external, adjustable pressure switch\u003c\/a\u003e\u003c\/span\u003e\r\n\r\nWarranty: 12 months from date of purchase.","brand":"Aquatec","offers":[{"title":"Default Title","offer_id":42411733549119,"sku":"P-AQ550-24-P-V2","price":138.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/4611\/5647\/files\/P-AQ550-AC-P-V2.png?v=1763417235"},{"product_id":"aquatec-550-ac-pump-fortified","title":"Aquatec 550 - AC Pump, Fortified","description":"\u003cstrong\u003eAquatec 550 Series Booster Pump, 115 Volt AC Version 2\u003c\/strong\u003e\r\n\r\n\u003cstrong\u003eNow \"fortified\" to IP65 which further resists moisture and dust. \u003cspan style=\"color: #0000ff;\"\u003e\u003ca style=\"color: #0000ff;\" href=\"https:\/\/backwoodssolar.com\/product\/aquatec-straight-1-2-male-barbed-2\/\"\u003e1\/2\" barbed intake\u003c\/a\u003e\u003c\/span\u003e included.\u003c\/strong\u003e\r\n\r\nA medium duty booster pump, 550 series pumps are appropriate for applications that include drawing water from a holding tank or shallow water source and pressurizing household plumbing; as well as moving water from one location, over distance or uphill, to another location.\r\n\r\nA booster pump is intended to be placed near the water source with a maximum draw on the intake side of 11 feet of lift (de-rate by 1' for every 1000' above sea level). Despite this capability, Backwoods always recommends a foot valve on the intake pipe when drawing water up from a source, to help keep the intake primed.  An optimum configuration would be to supply gravity fed water from an elevated holding tank or cistern to the pump's intake to drive household's pressure tank and plumbing.\r\n\r\nBackwoods features a model that includes a standard 5 chamber diaphragm pump head, a permanent magnet motor, quick disconnect inlet\/outlet ports, and a built-in pressure switch (cut-in at ~45 psi, shut-off at 60 psi).  \u003cspan style=\"color: #0000ff;\"\u003e\u003ca style=\"color: #0000ff;\" href=\"https:\/\/backwoodssolar.com\/product\/aquatec-straight-1-2-male-barbed-2\/\"\u003e1\/2\" barbed intake and outlet port fittings\u003c\/a\u003e\u003c\/span\u003e are included. These are ideal for connection to flexible hose to act as a shock absorber for pump vibrations. Order our P-EZ kit separately if desired.  The built-in pressure switch is NOT adjustable.  Backwoods has an external Square D pressure switch that can be used instead, to operate the pump at lower, adjustable pressure settings for lower power consumption.\r\n\r\nThe 550 is a higher volume booster pump, capable of 5.6 gallons per minute at no head\/pressure; and a maximum pressure capability of 70 psi(the equivalent of 161' of lift) with a delivery of 2.9 gallons per minute.  At half power, the pumps can run for extended periods of at least a couple of hours with no heat concerns; BUT running at higher pressures than ~15 psi should be limited to runs of 20 minutes at a time to avoid overheating.  This is a possible issue to consider with very large pressure tanks that take a long time to fill, but easily avoided with a medium pressure tank that can be charged to full in 10 minutes or less.\r\n\r\nPower draw at no head is 0.89 amps, up to 2.10 amps at 70 psi.\r\n\r\nAlthough newly fortified, the diaphragm pump head does have parts that will wear out over time and are field serviceable.  Backwoods stocks the most commonly needed Lower Housing Assembly that includes the diaphragm and \"wobble\" bearing, and the Valve Housing Assembly that has the actual valve manifold.  Typical service life for these parts are 2 to 5 years.  Reduced GPM volumes over time indicate that the diaphragm and valves are suffering wear.  This pump is capable of being run dry.\r\n\r\nMeasures 10\" L x 4.5\" H x 5\" W\r\nWeighs 7 lbs.\r\n\r\nRecommended:\r\n\r\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca style=\"color: #0000ff; text-decoration: underline;\" href=\"https:\/\/backwoodssolar.com\/product\/aquatec-straight-1-2-male-barbed-2\/\"\u003eP-AQUA-QBS554 barbed fittings\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\r\n\r\nConsider also ordering:\r\n\u003cspan style=\"color: #0000ff;\"\u003e\u003ca style=\"color: #0000ff;\" href=\"https:\/\/backwoodssolar.com\/product\/ez-pump-kit-4clamps-15-hose-2\/\"\u003eP-EZ hose and hose clamp connection kit\u003c\/a\u003e\u003c\/span\u003e\r\n\u003cspan style=\"color: #0000ff;\"\u003e\u003ca style=\"color: #0000ff;\" href=\"https:\/\/backwoodssolar.com\/product\/aquatec-550-pump-strainer\/\"\u003eP-AQUA-550-FILT intake strainer\u003c\/a\u003e\u003c\/span\u003e\r\n\u003cspan style=\"color: #0000ff;\"\u003e\u003ca style=\"color: #0000ff;\" href=\"https:\/\/backwoodssolar.com\/product\/aquatec-550-valve-housing-assembly\/\"\u003eP-AQUA-550-VHA valve housing\u003c\/a\u003e\u003c\/span\u003e\r\n\u003cspan style=\"color: #0000ff;\"\u003e\u003ca style=\"color: #0000ff;\" href=\"https:\/\/backwoodssolar.com\/product\/aquatec-550-lower-housing-assembly\/\"\u003eP-AQUA-550-LHA lower housing assembly\u003c\/a\u003e\u003c\/span\u003e\r\n\u003cspan style=\"color: #0000ff;\"\u003e\u003ca style=\"color: #0000ff;\" href=\"https:\/\/backwoodssolar.com\/product\/square-d-pressure-switch\/\"\u003eP-PS-SQD external, adjustable pressure switch\u003c\/a\u003e\u003c\/span\u003e\r\n\r\nWarranty: 12 months from date of purchase.","brand":"Aquatec","offers":[{"title":"Default Title","offer_id":42411733811263,"sku":"P-AQ550-AC-P-V2","price":142.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/4611\/5647\/files\/P-AQ550-AC-P-V2.png?v=1763417235"},{"product_id":"bws-dc-surface-mount-pump-8-gpm-98","title":"BWS DC SURFACE MOUNT PUMP - 8 GPM 98'","description":"\u003cp\u003e\u003cstrong\u003eBackwoods Solar Surface Mount Pump with Integrated Controller\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Backwoods Solar SDC-8-98 is a surface mounted pump ideal for many off-grid applications. The DC motor can be driven with 20-40VDC solar direct.\u003c\/p\u003e\n\u003cp\u003eThe Backwoods Solar SDC-8-98 provides up to 8GPM at a lift of 98′. This pump is meant to draw water from less than 25 foot water supply depth. This pump does not have an integrated pressure switch, consider adding the \u003ca href=\"\/products\/telemecanique-pressure-switch\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eP-PS-SQD\u003c\/span\u003e\u003c\/a\u003e to your order.\u003c\/p\u003e\n\u003cp\u003eThis pump is Centrifugal. The impeller is brass. Screened foot valve is included.\u003c\/p\u003e\n\u003cp\u003eCentrifugal pumps feature dry-run protection. When the pump runs dry for 10 seconds it will stop and then try again after 1 minute. If it does not sense water again it will stop and attempt to run again after another 30 minutes.\u003c\/p\u003e\n\u003cp\u003eSolar direct applications should use a nominal panel size of 300 watts for standard applications, but larger 72 cell panels can be used for peak performance and a wider window of operation. Backwoods Solar surface pumps include an integral DC only pump controller free of charge.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum total lift of 98′\u003c\/li\u003e\n\u003cli\u003eMaximum flow of 8 GPM\u003c\/li\u003e\n\u003cli\u003eInlet and Outlet 1″ NPT threaded female\u003c\/li\u003e\n\u003cli\u003eDouble shielded brushless permanent magnet motor\u003c\/li\u003e\n\u003cli\u003eHigh Efficiency MPPT tracker and Vector control\u003c\/li\u003e\n\u003cli\u003eMotor is rated for 20-40Vmp. 48 max VOC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIndustry leading 3 year limited warranty\u003c\/p\u003e","brand":"Backwoods Solar","offers":[{"title":"Default Title","offer_id":42411734499391,"sku":"P-BW-SDC-8-98","price":315.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/4611\/5647\/files\/P-BW-SDC-1.png?v=1763406350"},{"product_id":"bws-dc-surface-mount-pump-9-gpm-200","title":"BWS DC SURFACE MOUNT PUMP - 9 GPM 200'","description":"\u003cp\u003e\u003cstrong\u003eBackwoods Solar Surface Mount Pump with Integrated Controller\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Backwoods Solar SDC-9-200 is a surface mounted pump ideal for many off-grid applications. The DC motor can be driven with 40-90VDC solar direct (optimal voltage range is 60-76VDC).\u003c\/p\u003e\n\u003cp\u003eThe Backwoods Solar SDC-9-200 provides up to 9GPM at a lift of 200′. This pump is meant to draw water from less than 25 foot water supply depth. This pump does not have an integrated pressure switch, consider adding the \u003ca href=\"\/products\/telemecanique-pressure-switch\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eP-PS-SQD\u003c\/span\u003e \u003c\/a\u003eto your order.\u003c\/p\u003e\n\u003cp\u003eThis pump is Centrifugal. The impeller is brass. Check valve is included.\u003c\/p\u003e\n\u003cp\u003eCentrifugal pumps feature dry-run protection. When the pump runs dry for 10 seconds it will stop and then try again after 1 minute. If it does not sense water again it will stop and attempt to run again after another 30 minutes.\u003c\/p\u003e\n\u003cp\u003eSolar direct applications should use a nominal panel size of 300 watts for standard applications, but larger 72 cell panels can be used for peak performance and a wider window of operation. Backwoods Solar surface pumps include an integral DC only pump  controller free of charge.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum total lift of 200′\u003c\/li\u003e\n\u003cli\u003eMaximum flow of 9 GPM\u003c\/li\u003e\n\u003cli\u003eInlet and Outlet 1″ NPT threaded female\u003c\/li\u003e\n\u003cli\u003eDouble shielded brushless permanent magnet motor\u003c\/li\u003e\n\u003cli\u003eHigh Efficiency MPPT tracker and Vector control\u003c\/li\u003e\n\u003cli\u003eMotor is rated for 40-76 Vmp. 96 max VOC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIndustry leading 3 year limited warranty\u003c\/p\u003e","brand":"Backwoods Solar","offers":[{"title":"Default Title","offer_id":42411734532159,"sku":"P-BW-SDC-9-200","price":345.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0629\/4611\/5647\/files\/P-BW-SDC-1.png?v=1763406350"}],"url":"https:\/\/backwoodssolar.com\/collections\/booster-pumps.oembed","provider":"Backwoods Solar","version":"1.0","type":"link"}